Gas Soldering Iron - 'Pyropen' • Adjustable between 200°C and 500°C • Used for heat shrink tubing and soldering and desoldering of surface mount components • Open burning flame for hard soldering and light brazing (not available in self-igniting model) • Reservoir for up to 3/4 hours soldering • Not supplied with gas Economy (WSTA-1) • Supplied with one WPT-2 tip and protective cap Self Igniting (WSTA-4) • As economy model but with integral piezo-electric ignitor • Functions as soldering iron and hot air tool, but not as a blow-torch Standard Model (WSTA-3) • As economy model but supplied as a kit in a metal box • Kit contains hot blow tip (4.9mm ID); tool support clip, torch ejector, cleaning sponge and operating manual Economy model WSTA1 888-4810 £44.12 Self igniting model WSTA4 888-4811 £72.42 Pyropen kit WSTA3 889-1914 £76.28 Soldering Tips Tapered needle WPT1 889-1915 £6.32 Soldering Tips 3mm chisel WPT2 889-1916 £6.32 Soldering Tips 2mm spade WPT3 889-1917 £6.32 Soldering Tips 3mm 35° spade WPT4 889-1918 £6.32 Soldering Tips Offset tapered needle WPT10 889-1919 £6.32 Soldering Tips Chisel tip WPT20 889-1920 £6.88 Hot Blow Nozzles 1.59mm I.D. WHC50 889-1921 £7.94 Hot Blow Nozzles 4.9mm I.D. WHC52 889-1922 £6.60 Hot Blow Nozzles Torch Ejector WP71T 889-1923 £9.20 Hot Blow Nozzles Soldering Ejector WP70S 889-1924 £9.20 Spares Barrel assembly not self igniting model WP72M 889-1925 £2.89 Spares Gas refill (75ml) PGR1 889-1926 £2.75 Spares Piezo igniter 803U 889-1927 £6.89 FROM ONLY